升降貨梯使用過程中需要注意哪些事項？

1.非電氣專業職員不得隨意拆裝重慶升降貨梯電器，以防觸電或誤接。Non electric professional staff shall be free to disassemble the Chongqing elevator goods ladder electrical appliances, in order to prevent electric shock or mistake.

2.需要進入重慶升降貨梯工作平臺下面檢驗時，必需吊住升降平臺工作平臺。以防升降平臺臺溘然下降，造成職員傷亡。Need to enter the Chongqing elevator landing platform below the working platform, the lifting platform must be suspended platform. In order to prevent the lifting platform passed down, causing casualties.

3.非專業職員不得任意調整溢流閥，液壓系統中的每個元件都是在劃定壓力下工作時，任意調整溢流閥后，可能會造成液壓系統非正常運轉。對人、機、物都會有不必要的損傷。Non professional staff shall not be arbitrarily adjusted relief valve, hydraulic system of each component is under the designated pressure work, any adjustment relief valve, the hydraulic system may be caused by abnormal operation. There will be no need for people, machines, and things.

4.卸液壓系統任何部位之前，必需首先卸壓，以免壓力油噴出，工作臺溘然下滑。Before any part of unloading hydraulic system, must first pressure relief, in order to avoid pressure oil spray, bench passed down.

5.相應運動部件間均加注一些潤滑油，延長軸承使用壽命。The corresponding moving parts are filled with lubricating oil, prolong the service life of the bearing.

6.檢查重慶升降貨梯液壓油的油質和油位。升降臺全程升起。在這位置時，液壓油面應高出箱底40-50毫米。重慶升降平臺液壓機是否變暗、發粘或有砂礫等異物，如有發現應及時更換120#液壓油。Chongqing check cargo lifter hydraulic oil oil and oil. Lift table full rise. In this position, the hydraulic oil level should be higher than the 40-50 mm. Chongqing lifting platform hydraulic press is dark, sticky or gravel and other foreign bodies, such as the discovery should be replaced in a timely manner 120# hydraulic oil.